Commercial / Industrial Iron, Sulphur & Manganese Filters
- Flow rates from 1 - 2000 USGPM
Questions?
Excalibur commercial/industrial iron, sulphur & manganese filters are most often used to filter iron content from water but these units work in such a way as to reduce the concentration of both Manganese and Sulphur in treated water.
Iron is present in some proportion in most groundwater sources, and prevents other treatment components from operating properly.
A common application for iron filters is in preparing water for commercial boilers, where feedwater iron content should be less than 20ppb. At higher concentrations, iron can quickly falls out of solution and stick to surfaces causing scaling and fouling. It can also plug filters and plumbing and foul Reverse Osmosis membranes. When in contact with boiler tubes, it causes fouling that inhibits heat transfer and boiler efficiency. These systems also remove hydrogen sulphide, which has an objectionable odor and is highly corrosive, as well as other metals that can compromise plumbing and RO membranes.
Cooling Towers and postprocess remediation systems are also sensitive to high levels of iron. Excalibur’s iron filters reduce iron concentration to appropriate levels.
Our Iron, Sulphur & Manganese Filters are available in a wide range of flow rates.
To see the full line of Excalibur commercial/industrial Iron, Sulphur & Manganese Filters, please visit the Excalibur Water Systems website or contact us for more information!